6,050 found, showing page 11 of 152
$49.99
DS300 MEDIUM BOX
Part of the Dewalt ToughSystem series of portable tool storage. Features durable 4mm thick structural foam box wall which provides robust structure, and integrated water seal to protect contents. Compatible with Dewalt ToughSystem Carrier. Limited lifetime warranty.
View Details
$37.99
TSTAK ORGANIZER
Part of the Dewalt TSTAK portable tool storage system. Stackable and connectable with a bi-material handle for easy and comfortable lifting. Rust-resistant, heavy-duty metal latches. Compatible with Dewalt TSTAK cart. Limited lifetime warranty.
View Details
$39.99
TSTAK DEEP BOX
Part of the Dewalt TSTAK portable tool storage system. Stackable and connectable with a bi-material handle for easy and comfortable lifting. Rust-resistant, heavy-duty metal latches. Compatible with Dewalt TSTAK cart. Limited lifetime warranty.
View Details
$27.99
TSTAK FLAT TOP CASE
Part of the Dewalt TSTAK portable tool storage system. Stackable and connectable with a bi-material handle for easy and comfortable lifting. Rust-resistant, heavy-duty metal latches. Compatible with Dewalt TSTAK. Limited lifetime warranty.
View Details
$39.99
TSTAK CASE W/LNG HNDL
Part of the Dewalt TSTAK portable tool storage system. Stackable and connectable with a long, bi-material handle for easy and comfortable lifting. Rust-resistant, heavy-duty metal latches. Compatible with Dewalt TSTAK cart. Limited lifetime warranty.
View Details
$109.99
M18 2.0 AH BATTERY PACK
LITHIUM-ION battery delivers long life and run time with fade-free power. Battery fuel gauge displays remaining run-time Milwaukee REDLINK Intelligence. Overload protection prevents user from damaging their cordless power tool investment in abusive situations. Temperature management system keeps battery in ideal temperature range to provide maximum life. Individual cell monitoring ensures optimal charge and discharge for maximum life. Discharge protection prevents cell damage from over-discharge. Cell separator. Impact and vibration protective rubber. For use with Milwaukee M18 cordless tools.
View Details
$16.99
5PK 9" 5T PRUNING BLADE
Diablo fleam ground reciprocating saw blades provide the best pruning/cutting performance. Bi-directional tooth design allows for fast and smooth cutting in both directions. Tip design enables faster, easier plunging and hardened cutting edge provides long cutting life. Ideal for pruning wood, including pressure-treated wood. Not recommended for cutting wood with nails.
View Details
$23.99
5PK 12" 5T PRUNING BLADE
Diablo fleam ground reciprocating saw blades provide the best pruning/cutting performance. Bi-directional tooth design allows for fast and smooth cutting in both directions. Tip design enables faster, easier plunging and hardened cutting edge provides long cutting life. Ideal for pruning wood, including pressure-treated wood. Not recommended for cutting wood with nails.
View Details
$36.99
*HAMMER BRICK 20
Steel handle. Forged 1-piece head handle design of tool steel. Full polished. Revolutionary new Bricklayers Grip features a super tough nylon end cap. Perfect for all tamping.
View Details
$21.99
DAKURA BLK/APRD MIR LENS
Lenses block UVA/UVB/UVC (ultraviolet) rays. Scratch and fog resistant. ANSI (American National Standards Institute) Z87.1 +2010 and Military Ballistic MCEPS GL-PD 10-12 compliant. Highly flexible nylon frame with soft megol (hypo-allergenic thermal plastic rubber) temple tips for improved comfort.
View Details
$7.99
16oz TITEBOND GLUE
An aliphatic resin glue. Features the tack, toughness and durability of liquid hide glue. Equal or superior to any other glue in strength and versatility. Is not waterproof. Comes in plastic container.
View Details
$12.99
QT TITEBOND GLUE
An aliphatic resin glue. Features the tack, toughness and durability of liquid hide glue. Equal or superior to any other glue in strength and versatility. Is not waterproof. Comes in plastic container.
View Details
$42.99
10# 5/32 6011 ELECTRODE
Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of strong arc force. Useful for galvanized tanks, steel casting, and pressure pipe.
View Details
$44.99
1/8" 10LB 6010 WELD ROD********
Mild steel, "Flexiweld", all purpose electrode used in all positions. Deep penetrating rod for carbon and galvanized steel. For use with a DC (Direct Current) welder and runs on DCEP (reverse polarity). Ideal for welding through light to medium amounts of dirt, rust, or paint.
View Details
$31.99
.5LB 1/8x18" SIL-FLO BRZ ROD
A brazing alloy that is ideal for large and small copper tubing installations. Self-fluxing on copper. Typical applications include: refrigeration control valves (copper and brass), joining copper wires to rotor bars, electrical connections, radiant heating systems, air conditioning units, hot and cold water lines, and heat exchanges. T-joints, swage joints and sleeves, couplings on return bends and condenser fittings. Sil-Flo is not recommended for ferrous metals such as iron or steel. It is only for copper base metals as an effective economical alternative to copper-silver alloy rods.
View Details
$7.75
125' #2 WELDING CABLE
Highly flexible welding cable #2 gauge manufactured with 636 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM (Ethylene Propylene Diene Monomer) jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600V (volt). Conductor temperature range of -58 deg (degree) F to 221 deg F. Meets or exceeds ASTM (American Society for Testing and Materials) B-172.
View Details
$39.99
3LB DRILL HAMMER
Steel handle. Forged steel 1-piece head handle. Painted finish, polished face. Nylon vinyl cushion-grip. The proper tool for driving hardened nails and cold chisels. 3 lb.
View Details
$11.99
CLR REPLACEMENT SHIELD
Replacement clear grinding shield for Forney grinding shield assemblies. Meets ANSI (American National Standards Institute) Z87.1 Safety Standards. Not to be used for oxy-acetylene welding. 15-1/2" x 8".
View Details
$38.99
14OZ DRYWALL HAMMER
Steel handle. Forged steel 1-piece head handle. Full polished. Blue nylon vinyl, Shock Reduction Grip is ergonomically correct to reduce vibration. Crowned scored face reduces breaking of face paper of board. 14 oz. 13-1/2" overall length.
View Details
$23.99
SIZE #1 HD CUTTING TIP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines cut better, resist clogs and makes cleaning easier. Tips fit Forney 1711 torch kit and similar Victor compatible equipment.
View Details
$23.99
SIZE #2 HD CUTTING TIP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines cut better, resist clogs and makes cleaning easier. Tips fit Forney 1711 torch kit and similar Victor compatible equipment.
View Details
$7.49
2-1/2" CRIMP WIRE WHEEL
Stem mounted wire wheel brush. Designed for easy access into narrow holes and confined areas. Crimped styled for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Use with any 1/4" diameter electric power drill or 01990 pneumatic (air) drill. 6000 max rpm (revolutions per minute).
View Details
$7.49
2-1/2" CRIMP WIRE WHEEL
Stem mounted wire wheel brush. Designed for easy access into narrow holes and confined areas. Crimped styled for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Use with any 1/4" diameter electric power drill or 01990 pneumatic (air) drill. 6000 max rpm (revolutions per minute).
View Details
$13.79
14 OZ SPRAY ADHESIVE
Heavy-duty, multi-purpose and easy to use spray adhesive. Forms a clear, permanent bond that is moisture resistant and can be used on projects both indoors and out. The wide pad nozzle and controlled spray provide an even application on the project. Bonds wood, metal, fabric, foam, plastic, paper, glass, leather, and more.
View Details
$10.49
ZAP IT LIGHT CURING GLUE 4g
ZAP IT is the light curing glue that bonds virtually everything. Fix, seal and fill cracks. Glue and zap with the lightfor a 5 second bond. Pieces will bond without the light in 1 to 2 minutes. Sandable and paintable when dry. Dust will not stick to cured surface. 2500 Lb. strength.
View Details
$31.99
7.5" END CUTTING PLIER
XLT Xtreme Leverage Technology means considerably less force required to cut than traditional high leverage. Slimmer, lighter and better balanced design. Precision machined knife and anvil style cutting edges ensure perfect mating and superior cutting edge life. Laser heat-treated cutting edges last longer. High carbon steel for superior performance on the job and an ultimate rust preventative coating. Channellock Blue grips for comfort.
View Details
$480.59
M18 HAMRDRL/IMPACT KIT
M18 FUEL features a POWERSTATE brushless motor, REDLINK PLUS electronic intelligence and REDLITHIUM battery technology resulting in longer motor life, more run time and more power. 2-Tool Combo Kit includes the M18 FUEL 1/2" Hammer Drill/Driver (2704-20) with a 1/2" metal single sleeve ratcheting locking chuck. Drill/driver delivers 1200 in/lb (inch/pound) torque and 0-550/0-2000 rpm (revolutions per minute) to provide faster drilling speed under heavy load to increase productivity. 7-3/4" L, 3-1/2 lb (pound). Also included is the M18 FUEL 1/4" Hex Impact Driver (2753-20). Impact driver delivers 1800 in/lb torque and 0-3000 rpm. 4-Mode DRIVE CONTROL provides greater control over output speed and power. Features LED (light emitting diode) light. 5-/4" L, 2.1 lb. Includes (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Packs (48-11-1850), (1) M18 & M12 Multi-Voltage Charger (48-59-1812), (2) belt clips, (2) bit holders, (1) side handle, (1) carrying case.
View Details
$238.99
18/ 20/ AC WET DRY VAC
Cordless or corded operation powered by either an 18V or 20V MAX lithium-ion battery or an AC (alternating current) outlet. HEPA (high-efficiency particulate air) rated wet/dry filter traps dust with 99.97\% efficiency at 1 micron. Easily accessible, washable/reusable filter - tap or water rinse to clean. Heavy-duty, crush-resistant, fully-integrated 5 Ft. (by 1-1/4 In. diameter) hose provides durability, flexibility and ease-of-use. On-board hose, cord and accessory storage makes the vacuum easy to carry/transport. Tank capacity provides enough storage to empty a toilet or clogged pipe. Also included are crevice tool, wide nozzle tool, HEPA filter. Bare tool - battery and charger not included.
View Details
$209.99
20V MAX BRUSHLESS DRILL
DeWalt brushless motor delivers up to 57\% more run time over brushed. XR lithium-ion batteries with fuel gauge provide 33\% more capacity over standard packs. Compact, lightweight design fits into tight areas. High speed transmission delivers 2-speed settings improving speed and torque control across a range of fastening and drilling applications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. 3-Mode LED (light emitting diode) lighting for dark or confined spaces. LED spotlight mode features 20-minute shutoff function allowing for extended work time in dark spaces. Also included are (2) 20V MAX XR compact lithium-ion batteries 2.0 Ah (ampere-hour), fast charger, belt hook, on-board bit holder, kit box.
View Details
$244.99
20V MAX BL HAMMER DRILL
DeWalt brushless motor delivers up to 57\% more run time over brushed. XR lithium-ion batteries with fuel gauge provide33\% more capacity over standard packs. Compact (7-3/4" front to back), lightweight design fits into tight areas. High speed transmission delivers 2-speed settings improving speed and torque control across a range of fastening and drillingapplications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED (light emitting diode) light with 20 second trigger release delay provides increased visibility in dark or confined spaces. LED placement on tool foot eliminates chuck shadows. Also included are (2) 20V MAXXR compact lithium-ion batteries 2.0 Ah (ampere hour), fast charger, belt hook, on-board bit holder, kit box.
View Details
$375.00
20V BL HMR DRILL/IMPACT*********
DeWalt brushless motor delivers up to 57\% more run time over brushed. XR lithium-ion batteries with fuel gauge provide 33\% more capacity over standard packs. DCD796 20V (volt) MAX 1/2" hammer drill's compact (7.5" front to back), lightweight (3.6 pounds) design fits into tight areas. 3-Mode LED (light emitting diode) light with 20 minute trigger release delay in Spotlight Mode provides increased visibility in dark or confined spaces. 550-2000 rpm (revolutions per minute). DCF887 20V MAX 1/4" impact driver's compact (5.4" front to back) design fits into tight areas. 3 LED lights embedded in front of tool with 20 second trigger release delay. 1000/280/3250 rpm, 240/1500/1825 in/lb (inch/pound) torque. Also included are (2) 20V MAX XR compact lithium-ion batteries 2.0 Ah (ampere hour), fast charger, 2 belt hooks, contractor bag.
View Details
$219.99
18V DRILL IMPACT KIT************
XFD10Z 18V LXT 1/2 In. (inch) cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Features a compact design at only 7-1/4 In. long and weighs only 3.3 Lb. (pound) with battery for reduced operator fatigue. XDT11Z 18V LXT 1/2 In. impact driver with variable speed, 0-2900 rpm and 0-3500 IPM, delivers up to 1460 In./Lb. of max torque. Features a compact design at only 5-3/8 In. long and weighs only 2.8 Lb. with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. Built-in LED (light emitting diode) light illuminates the work area. Includes (2) BL1820B 18V compact lithium-ion 2.0 Ah batteries, (1) DC18RC 18V lithium-ion rapid optimum charger, and tool bag.
View Details
$10.99
OVR-GLAS SAFETY GLASSES
Frames are designed to fit over most prescription eyewear while keeping vision clear. Indoor/Outdoor lens. For use over small to medium framed glasses. Updated, squared off look. Stylish enough to wear without glasses. Maximum UV protection.
View Details
$32.99
POLARIZED SAFETY GLASSES
Espresso features: Brown polarized lenses, sleek Havana brown frame, maximum UV protection, tight-wrapping design with soft rubber nosepads. Safety glasses meet the Impact Protector requirements of ANSI (American National Standards Institute)/ISEA (International Safety Equipment Association) Z87.1-2010 and OSHA (Occupational Safety and Health administration) eye protection standards.
View Details
$29.99
N95 10PK RESPIRATOR W/ VALVE
Exhalation valve reduces heat and humidity build-up. Heavy-duty fully adjustable elastic straps for optimum fit and comfort. Electrostatic filter media traps dust and harmful particles while maintaining low breathing resistance. Latex-free and hypoallergenic for users with sensitive skin. NIOSH (National Institute for Occupational Safety and Health) approved, N95 class.
View Details
$19.99
CRDLS PRECISION ENGRAVER
Enables precision cordless engraving anywhere by anyone from professional technicians and mechanics to homeowners and DIYers (do it yourselfers). Diamond tip bit, 20,000 RPM (revolutions per minute) motor. Protect all types of valuables with identifying markings and even perform delicate personalization of items. Engraves glass, metal, ceramic, and plastic. Aluminum body offers superior durability and the one-of-a-kind tri-lobe ergonomic grip provides the ultimate in comfort and ease-of-use. Uses standard engraving bit. 2 AAA batteries included.
View Details
$19.99
MULTI BIT DRIVER W/SQ 9in1
9-in-1 multi-bit drivers feature 3-1/2" power groove bits for power tool compatibility and maximum jobsite versatility. Revolver style bit storage and selection. The chrome plated bits provide marine-grade rust protection and reduce wear from the elements. Magnetic bit retention delivers consistent driving performance. Wrench ready hex shanks deliver additional leverage. Extended reach design. Up to 10 ga (gauge) wire stripper and loop maker for additional functionality. Limited Lifetime Warranty. Includes 1 each: 9-in-1 handle, wire stripper, loop maker, Phillips #1, Phillips #2, slotted 1/4", slotted 3/16", square drive #1, square drive #2, square drive #3.
View Details
$19.99
TORX MULTI BIT DRIVER
Torx key driver offers improved functionality versus traditional folding keys. Features 3-1/2" power groove bits for power tool compatibility. Revolver style bit storage and selection. Chrome plated bits provide marine-grade rust protection to reduce wear from the elements. Magnetic bit retention delivers consistent driving performance. Wrench ready hex shanks deliver additional leverage. Extended reach design. Up to 10 ga (gauge) wire stripper and loop maker for additional jobsite functionality. Limited Lifetime Warranty. Includes 1 each: 9-in-1 handle, loop maker, wire stripper, 1/4 In. nut driver, Phillips #1, T8, T10, T15, T20, T25, T27, T30.
View Details
$18.99
HEX ME MULTI BIT DRIVER
Metric hex key driver offers improved functionality versus traditional folding keys. Features 3-1/2" power groove bits for power tool compatibility. Revolver style bit storage and selection. Chrome plated bits provide marine-grade rust protection to reduce wear from the elements. Magnetic bit retention delivers consistent driving performance. Wrench ready hex shanks deliver additional leverage. Extended reach design. Up to 10 ga (gauge) wire stripper and loop maker for additional jobsite functionality. Limited Lifetime Warranty. Includes 1 each: 9-in-1 handle, nut driver, loop maker, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm.
View Details
$19.99
SQ RATCH MLTI BIT DRIVER
9-in-1 multi-bit drivers feature 3-1/2" power groove bits for power tool compatibility and maximum jobsite versatility. All metal high torque ratchet delivers more durability and 2 times driving speed. Revolver style bit storage and selection. The chrome plated bits provide marine-grade rust protection and reduce wear from the elements. Magnetic bit retention delivers consistent driving performance. Extended reach design. Up to 10 ga (gauge) wire stripper and loop maker for additional functionality. Limited Lifetime Warranty. Includes 1 each: 9-in-1 ratchet handle, loop maker, 1/4" ratchet nut driver, Phillips #1, Phillips #2, slotted 1/4", slotted 3/16", square drive #1, square drive #2, square drive #3.
View Details
